A 146 × 24 mm straight-grain WPC decking board, co-extruded in one piece from wood-plastic composite. Its 146 mm face is wider than a standard narrow board, which means one less seam per run — the deck reads as a single continuous surface, and there's simply less cutting, less clipping and less labour per square metre. At 24 mm deep it stays light, so it asks less of the joist spacing and sub-base — a real advantage on balconies and rooftop terraces where added weight is a problem. The open channels let air and water pass through, so nothing pools and nothing stays damp: no rot, no mould, no termites.Compared with the heavier 140 × 30, the 146 × 24 is lighter and uses less material — the value pick for gardens, balconies, guesthouses and light commercial leisure areas.

This 140x25mm WPC decking features a core structure combining circular internal voids with wide surface grooves. The voids create continuous channels that rapidly drain rainwater—funneled from the grooves—thereby minimizing surface pooling and moisture retention; airflow through these channels also helps reduce the risk of warping caused by heat and humidity. The wide groove pattern provides enhanced traction in wet conditions and helps mask minor scuffs from daily use. While the hollow design reduces the board's weight, it preserves structural load-bearing walls; combined with the reinforcing effect of the wide grooves, this ensures superior flexural strength and load-bearing stability. Additionally, the design allows for more intuitive alignment of the interlocking system during installation.

For the 140*25mm WPC decking with 6 round holes and wide grooves, here's a one-paragraph introduction: This 140*25mm WPC decking features a 6 round-hole + wide-groove structure designed for drainage, ventilation, and load-bearing performance. The longitudinal round holes, combined with wide surface grooves, quickly channel rainwater away to prevent pooling and board damage, while internal airflow reduces moisture buildup and minimizes the risk of warping. The wide grooves improve slip resistance on wet days and help hide everyday scratches. The round holes reduce weight while maintaining solid load-bearing walls, offering better bending resistance and easier clip alignment during installation. This structure keeps the deck stable in both hot sun and humid outdoor conditions, with simple, low-maintenance cleaning.